(Almost) Final version of the new container loader

In the video, you see the (almost) final version of the container loader. The only thing that is missing, is the power cable carrier.

What is new in this version (apart from finishing the build)? First of all, it has been added to the ‘real’ conveyor belt (you can see the enormous length ;-). This conveyor belt moves the containers from the warehouse to the wagons.

Furthermore, an ultrasonic sensor has been added at the top of the super structure. This ultrasonic sensor detects if a container has passed under it, so it ‘knows’ that after 1 second it can set its state to ‘container delivered’. Without this sensor, the only way to ‘ensure’ if the container has been loaded, was to use a predefined time frame. A predefined time frame has two major drawbacks: you need a very long time to make sure that the container has arrived. And you can not guarantee that the container will be delivered, no matter how long you define the time frame. You can see the ultrasonic sensor detection in close up around time frame 0:45.

Delta Crane will be replaced by Container Loading Station

For our layout in 2020, we will replace the Delta Crane, the module that was responsible for loading the containers from the conveyor belt to the wagons. You can see the Delta Crane in action in the following video (start at time frame 3:09):

One of the biggest disadvantages of the crane, is its speed. Or its slowness, that is a better description. In order to decrease the total running time (from color selection to candy delivery), loading of the wagons is now one of the bottlenecks.

So, I started to think about a new way of loading the train. How do I get the containers from the belt, to the wagons ….?

Another conveyor belt? No, to straight forward.

A push mechanism (kind of reverse of the delivery station)? No, been there, done that.

A robot arm? Yeah, that could work but is that special enough?

(quite some time passing by …)

And then I came with something completely new, as you can see in the following video:

At the left, you can see (a simplified part of) the conveyor belt, on the right you see the (simplified) train. The superstructure in the middle is able to move back and forth, so it can reach the four wagons without moving the train. In this first prototype, I can only move the superstructure by hand. But of course, this will be automated as well using sensors to detect the 4 wagon positions.

You can find renders of the final result at our Flickr page (click on the photo below).