Pneumatic compressor for the 6-axis robot arm with auto start/stop

The grabber of the robot arm is opened and closed by pneumatic pressure. Therefore, I needed an air compressor that can generate a pressure of approx. 20 – 30 Psi. But how do you manage this air pressure? If the motor keeps running, the air pressure becomes too high. If you switch the motor on and off manually, you need to stay alert and watch the manometer if the air pressure doesn’t become too low. The solution: build an automatic start/stop system. In this article you can read how I achieved this.

Continue reading

Loading the train with the 6-axis DOF robot arm

I wrote a small test program for the robot arm to load the train with two containers. Loading the two wagons was done in one minute, so much faster than the candy crane.

Have a look at the video and please share with me what you think of it.